41 Reaction Stoichiometry

Learning Objectives

By the end of this section, you will be able to:

  • Explain the concept of stoichiometry as it pertains to chemical reactions
  • Use balanced chemical equations to derive stoichiometric factors relating amounts of reactants and products
  • Perform stoichiometric calculations involving mass, moles, and solution molarity

A balanced chemical equation provides a great deal of information in a very succinct format. Chemical formulas provide the identities of the reactants and products involved in the chemical change, allowing classification of the reaction. Coefficients provide the relative numbers of these chemical species, allowing a quantitative assessment of the relationships between the amounts of substances consumed and produced by the reaction. These quantitative relationships are known as the reaction’s stoichiometry, a term derived from the Greek words stoicheion (meaning “element”) and metron (meaning “measure”). In this module, the use of balanced chemical equations for various stoichiometric applications is explored.

The general approach to using stoichiometric relationships is similar in concept to the way people go about many common activities. Food preparation, for example, offers an appropriate comparison. A recipe for making eight pancakes calls for 1 cup pancake mix, \frac{3}{4} cup milk, and one egg. The “equation” representing the preparation of pancakes per this recipe is

1\phantom{\rule{0.2em}{0ex}}\text{cup mix}+\phantom{\rule{0.2em}{0ex}}\frac{3}{4}\phantom{\rule{0.2em}{0ex}}\text{cup milk}+1\phantom{\rule{0.2em}{0ex}}\text{egg}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}8\phantom{\rule{0.2em}{0ex}}\text{pancakes}

If two dozen pancakes are needed for a big family breakfast, the ingredient amounts must be increased proportionally according to the amounts given in the recipe. For example, the number of eggs required to make 24 pancakes is

24\phantom{\rule{0.2em}{0ex}}\overline{)\text{pancakes}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{1\phantom{\rule{0.2em}{0ex}}\text{egg}}{8\phantom{\rule{0.2em}{0ex}}\overline{)\text{pancakes}}}\phantom{\rule{0.2em}{0ex}}=3\phantom{\rule{0.2em}{0ex}}\text{eggs}

Balanced chemical equations are used in much the same fashion to determine the amount of one reactant required to react with a given amount of another reactant, or to yield a given amount of product, and so forth. The coefficients in the balanced equation are used to derive stoichiometric factors that permit computation of the desired quantity. To illustrate this idea, consider the production of ammonia by reaction of hydrogen and nitrogen:

{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}\left(g\right)

This equation shows ammonia molecules are produced from hydrogen molecules in a 2:3 ratio, and stoichiometric factors may be derived using any amount (number) unit:

\frac{2\phantom{\rule{0.2em}{0ex}}{\text{NH}}_{3}\phantom{\rule{0.2em}{0ex}}\text{molecules}}{3\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\phantom{\rule{0.2em}{0ex}}\text{molecules}}\phantom{\rule{0.4em}{0ex}}\text{or}\phantom{\rule{0.4em}{0ex}}\frac{\text{2 doz}\phantom{\rule{0.2em}{0ex}}{\text{NH}}_{3}\phantom{\rule{0.2em}{0ex}}\text{molecules}}{\text{3 doz}\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\phantom{\rule{0.2em}{0ex}}\text{molecules}}\phantom{\rule{0.4em}{0ex}}\text{or}\phantom{\rule{0.4em}{0ex}}\frac{\text{2 mol}\phantom{\rule{0.2em}{0ex}}{\text{NH}}_{3}\phantom{\rule{0.2em}{0ex}}\text{molecules}}{\text{3 mol}\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\phantom{\rule{0.2em}{0ex}}\text{molecules}}

These stoichiometric factors can be used to compute the number of ammonia molecules produced from a given number of hydrogen molecules, or the number of hydrogen molecules required to produce a given number of ammonia molecules. Similar factors may be derived for any pair of substances in any chemical equation.

Moles of Reactant Required in a Reaction How many moles of I2 are required to react with 0.429 mol of Al according to the following equation (see (Figure))?

2\text{Al}+3{\text{I}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{AlI}}_{3}
Aluminum and iodine react to produce aluminum iodide. The heat of the reaction vaporizes some of the solid iodine as a purple vapor. (credit: modification of work by Mark Ott)

This figure shows three photos with an arrow leading from one to the next. The first photo shows a small pile of iodine and aluminum on a white surface. The second photo shows a small amount of purple smoke coming from the pile. The third photo shows a large amount of purple and gray smoke coming from the pile.

Solution Referring to the balanced chemical equation, the stoichiometric factor relating the two substances of interest is \frac{\text{3 mol}\phantom{\rule{0.2em}{0ex}}{\text{I}}_{2}}{\text{2 mol Al}}. The molar amount of iodine is derived by multiplying the provided molar amount of aluminum by this factor:

This figure shows two pink rectangles. The first is labeled, “Moles of A l.” This rectangle is followed by an arrow pointing right to a second rectangle labeled, “Moles of I subscript 2.”

\begin{array}{ll}\hfill {\text{mol I}}_{2}& =0.429\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol Al}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{\text{3 mol}\phantom{\rule{0.2em}{0ex}}{\text{I}}_{2}}{2\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol Al}}}\\ & =\text{0.644 mol}\phantom{\rule{0.2em}{0ex}}{\text{I}}_{2}\end{array}

Check Your Learning How many moles of Ca(OH)2 are required to react with 1.36 mol of H3PO4 to produce Ca3(PO4)2 according to the equation 3\text{Ca}{\left(\text{OH}\right)}_{2}+2{\text{H}}_{3}{\text{PO}}_{4}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}{\text{Ca}}_{3}{\left({\text{PO}}_{4}\right)}_{2}+6{\text{H}}_{2}\text{O?}

Answer:

2.04 mol

Number of Product Molecules Generated by a Reaction How many carbon dioxide molecules are produced when 0.75 mol of propane is combusted according to this equation?

{\text{C}}_{3}{\text{H}}_{8}+5{\text{O}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}3{\text{CO}}_{2}+4{\text{H}}_{2}\text{O}

Solution The approach here is the same as for (Figure), though the absolute number of molecules is requested, not the number of moles of molecules. This will simply require use of the moles-to-numbers conversion factor, Avogadro’s number.

The balanced equation shows that carbon dioxide is produced from propane in a 3:1 ratio:

\frac{\text{3 mol}\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}}{\text{1 mol}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{3}{\text{H}}_{8}}

Using this stoichiometric factor, the provided molar amount of propane, and Avogadro’s number,

This figure shows two pink rectangles. The first is labeled, “Moles of C subscript 3 H subscript 8.” This rectangle is followed by an arrow pointing right to a second rectangle labeled, “Moles of C O subscript 2.”

0.75\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{3}{\text{H}}_{8}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{3\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}}}{1\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{3}{\text{H}}_{8}}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{6.022\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{23}\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}\phantom{\rule{0.2em}{0ex}}\text{molecules}}{\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}}}\phantom{\rule{0.2em}{0ex}}=1.4\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{24}\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}\phantom{\rule{0.2em}{0ex}}\text{molecules}

Check Your Learning How many NH3 molecules are produced by the reaction of 4.0 mol of Ca(OH)2 according to the following equation:

{\left({\text{NH}}_{4}\right)}_{2}{\text{SO}}_{4}+\text{Ca}{\left(\text{OH}\right)}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{NH}}_{3}+{\text{CaSO}}_{4}+2{\text{H}}_{2}\text{O}
Answer:

4.8 × 1024 NH3 molecules

These examples illustrate the ease with which the amounts of substances involved in a chemical reaction of known stoichiometry may be related. Directly measuring numbers of atoms and molecules is, however, not an easy task, and the practical application of stoichiometry requires that we use the more readily measured property of mass.

Relating Masses of Reactants and Products What mass of sodium hydroxide, NaOH, would be required to produce 16 g of the antacid milk of magnesia [magnesium hydroxide, Mg(OH)2] by the following reaction?

{\text{MgCl}}_{2}\left(aq\right)+2\text{NaOH}\left(aq\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{Mg}{\text{(OH)}}_{2}\left(s\right)+2\text{NaCl}\left(aq\right)

Solution The approach used previously in (Figure) and (Figure) is likewise used here; that is, we must derive an appropriate stoichiometric factor from the balanced chemical equation and use it to relate the amounts of the two substances of interest. In this case, however, masses (not molar amounts) are provided and requested, so additional steps of the sort learned in the previous chapter are required. The calculations required are outlined in this flowchart:

This figure shows four rectangles. The first is shaded yellow and is labeled, “Mass of M g ( O H ) subscript 2.” This rectangle is followed by an arrow pointing right to a second rectangle which is shaded pink and is labeled, “Moles of M g ( O H ) subscript 2.” This rectangle is followed by an arrow pointing right to a third rectangle which is shaded pink and is labeled, “Moles of N a O H.” This rectangle is followed by an arrow pointing right to a fourth rectangle which is shaded yellow and is labeled, “Mass of N a O H.”

16\phantom{\rule{0.2em}{0ex}}\overline{)\text{g Mg}{\left(\text{OH}\right)}_{2}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{1\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol Mg}{\left(\text{OH}\right)}_{2}}}{58.3\phantom{\rule{0.2em}{0ex}}\overline{)\text{g Mg}{\left(\text{OH}\right)}_{2}}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{2\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol NaOH}}}{1\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol Mg}{\left(\text{OH}\right)}_{2}}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{\text{40.0 g NaOH}}{\overline{)\text{mol NaOH}}}\phantom{\rule{0.2em}{0ex}}=\text{22 g NaOH}

Check Your Learning What mass of gallium oxide, Ga2O3, can be prepared from 29.0 g of gallium metal? The equation for the reaction is 4\text{Ga}+3{\text{O}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{Ga}}_{2}{\text{O}}_{3}.

Answer:

39.0 g

Relating Masses of Reactants What mass of oxygen gas, O2, from the air is consumed in the combustion of 702 g of octane, C8H18, one of the principal components of gasoline?

2{\text{C}}_{8}{\text{H}}_{18}+25{\text{O}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}16{\text{CO}}_{2}+18{\text{H}}_{2}\text{O}

Solution The approach required here is the same as for the (Figure), differing only in that the provided and requested masses are both for reactant species.

This figure shows four rectangles. The first is shaded yellow and is labeled, “Mass of C subscript 8 H subscript 18.” This rectangle is followed by an arrow pointing right to a second rectangle which is shaded pink and is labeled, “Moles of C subscript 8 H subscript 18.” This rectangle is followed by an arrow pointing right to a third rectangle which is shaded pink and is labeled, “Moles of O subscript 2.” This rectangle is followed by an arrow pointing right to a fourth rectangle which is shaded yellow and is labeled, “Mass of O subscript 2.”

702\phantom{\rule{0.2em}{0ex}}\overline{)\text{g}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{8}{\text{H}}_{18}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{1\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{8}{\text{H}}_{18}}}{114.23\phantom{\rule{0.2em}{0ex}}\overline{)\text{g}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{8}{\text{H}}_{18}}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{25\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{O}}_{2}}}{2\phantom{\rule{0.2em}{0ex}}\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{C}}_{8}{\text{H}}_{18}}}\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}\frac{\text{32.00 g}\phantom{\rule{0.2em}{0ex}}{\text{O}}_{2}}{\overline{)\text{mol}\phantom{\rule{0.2em}{0ex}}{\text{O}}_{2}}}\phantom{\rule{0.2em}{0ex}}=2.46\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{3}\phantom{\rule{0.2em}{0ex}}\text{g}\phantom{\rule{0.2em}{0ex}}{\text{O}}_{2}

Check Your Learning What mass of CO is required to react with 25.13 g of Fe2O3 according to the equation {\text{Fe}}_{2}{\text{O}}_{3}+3\text{CO}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2\text{Fe}+3{\text{CO}}_{2}?

Answer:

13.22 g

These examples illustrate just a few instances of reaction stoichiometry calculations. Numerous variations on the beginning and ending computational steps are possible depending upon what particular quantities are provided and sought (volumes, solution concentrations, and so forth). Regardless of the details, all these calculations share a common essential component: the use of stoichiometric factors derived from balanced chemical equations. (Figure) provides a general outline of the various computational steps associated with many reaction stoichiometry calculations.

The flowchart depicts the various computational steps involved in most reaction stoichiometry calculations.

This flowchart shows 10 rectangles connected by double headed arrows. To the upper left, a rectangle is shaded lavender and is labeled, “Volume of pure substance A.” This rectangle is followed by a horizontal double headed arrow labeled, “Density.” It connects to a second rectangle which is shaded yellow and is labeled, “Mass of A.” This rectangle is followed by a double headed arrow which is labeled, “Molar Mass,” that connects to a third rectangle which is shaded pink and is labeled, “Moles of A.” To the left of this rectangle is a horizontal double headed arrow labeled, “Molarity,” which connects to a lavender rectangle which is labeled, “Volume of solution A.” The pink, “Moles of A,” rectangle is also connected with a double headed arrow below and to the left. This arrow is labeled “Avogadro’s number.” It connects to a green shaded rectangle that is labeled, “Number of particles of A.” To the right of the pink “Moles of A,” rectangle is a horizontal double headed arrow which is labeled, “Stoichiometric factor.” It connects to a second pink rectangle which is labeled, “Moles of B.” A double headed arrow which is labeled, “Molar mass,” extends from the top of this rectangle above and to the right to a yellow shaded rectangle labeled, “Mass of B.” A horizontal double headed arrow which is labeled, “Density” links to a lavender rectangle labeled, “Volume of substance B,” to the right. A horizontal double headed arrow labeled, “Molarity,” extends right to the of the pink “Moles of B” rectangle. This arrow connects to a lavender rectangle that is labeled, “Volume of substance B.” Another double headed arrow extends below and to the right of the pink “Moles of B” rectangle. This arrow is labeled “Avogadro’s number,” and it extends to a green rectangle which is labeled, “Number of particles of B.”

Airbags

Airbags ((Figure)) are a safety feature provided in most automobiles since the 1990s. The effective operation of an airbag requires that it be rapidly inflated with an appropriate amount (volume) of gas when the vehicle is involved in a collision. This requirement is satisfied in many automotive airbag systems through use of explosive chemical reactions, one common choice being the decomposition of sodium azide, NaN3. When sensors in the vehicle detect a collision, an electrical current is passed through a carefully measured amount of NaN3 to initiate its decomposition:

2{\text{NaN}}_{3}\left(s\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}3{\text{N}}_{2}\left(g\right)+2\text{Na}\left(s\right)

This reaction is very rapid, generating gaseous nitrogen that can deploy and fully inflate a typical airbag in a fraction of a second (~0.03–0.1 s). Among many engineering considerations, the amount of sodium azide used must be appropriate for generating enough nitrogen gas to fully inflate the air bag and ensure its proper function. For example, a small mass (~100 g) of NaN3 will generate approximately 50 L of N2.

Airbags deploy upon impact to minimize serious injuries to passengers. (credit: Jon Seidman)

This photograph shows the inside of an automobile from the driver’s side area. The image shows inflated airbags positioned just in front of the driver’s and passenger’s seats and along the length of the passenger side over the windows. A large, round airbag covers the steering wheel.

Key Concepts and Summary

A balanced chemical equation may be used to describe a reaction’s stoichiometry (the relationships between amounts of reactants and products). Coefficients from the equation are used to derive stoichiometric factors that subsequently may be used for computations relating reactant and product masses, molar amounts, and other quantitative properties.

Chemistry End of Chapter Exercises

  1. Write the balanced equation, then outline the steps necessary to determine the information requested in each of the following:

(a) The number of moles and the mass of chlorine, Cl2, required to react with 10.0 g of sodium metal, Na, to produce sodium chloride, NaCl.

(b) The number of moles and the mass of oxygen formed by the decomposition of 1.252 g of mercury(II) oxide.

(c) The number of moles and the mass of sodium nitrate, NaNO3, required to produce 128 g of oxygen. (NaNO2 is the other product.)

(d) The number of moles and the mass of carbon dioxide formed by the combustion of 20.0 kg of carbon in an excess of oxygen.

(e) The number of moles and the mass of copper(II) carbonate needed to produce 1.500 kg of copper(II) oxide. (CO2 is the other product.)

(f)

This figure includes two structural formulas. It reads, “The number of moles and the mass of,” which is followed by a structure with two C atoms bonded with a single horizontal at the center. Both C atoms have H atoms bonded above and below. The C atom to the left has a B r atom bonded to its left. The C atom to the right has a B r atom bonded to its right. Following this structure, the figure reads, “formed by the reaction of 12.85 g of,” which is followed by a structure with two C atoms connected with a horizontal double bond. The C atom to the left has H atoms bonded above and to the left and below and to the left. The C atom to the right has H atoms bonded above and to the right and below and to the right. The figure ends with, “with an excess of B r subscript 2.”

 

2. Determine the number of moles and the mass requested for each reaction in (Figure).

(a) 0.435 mol Na, 0.217 mol Cl2, 15.4 g Cl2; (b) 0.005780 mol HgO, 2.890 × 10−3 mol O2, 9.248 × 10−2 g O2; (c) 8.00 mol NaNO3, 6.8 × 102 g NaNO3; (d) 1665 mol CO2, 73.3 kg CO2; (e) 18.86 mol CuO, 2.330 kg CuCO3; (f) 0.4580 mol C2H4Br2, 86.05 g C2H4Br2

 

3. Write the balanced equation, then outline the steps necessary to determine the information requested in each of the following:

(a) The number of moles and the mass of Mg required to react with 5.00 g of HCl and produce MgCl2 and H2.

(b) The number of moles and the mass of oxygen formed by the decomposition of 1.252 g of silver(I) oxide.

(c) The number of moles and the mass of magnesium carbonate, MgCO3, required to produce 283 g of carbon dioxide. (MgO is the other product.)

(d) The number of moles and the mass of water formed by the combustion of 20.0 kg of acetylene, C2H2, in an excess of oxygen.

(e) The number of moles and the mass of barium peroxide, BaO2, needed to produce 2.500 kg of barium oxide, BaO (O2 is the other product.)

(f)

This figure includes two structural formulas. It reads, “The number of moles and the mass of,” which is followed by a structure with two C atoms connected with a horizontal double bond at the center. The C atom to the left has H atoms bonded above and to the left and below and to the left. The C atom to the right has H atoms bonded above and to the right and below and to the right. Following this structure, the figure reads, “required to react with H subscript 2 O to produce 9.55 g of,” which is followed by a structure with two C atoms connected with a horizontal single bond. The C atom to the left has H atoms bonded above, to the left, and below. The C atom to the right has H atoms bonded above and below. To the right, an O atom forms a single bond with the C atom. A single H atom is bonded to the right side of the O atom.

 

4. Determine the number of moles and the mass requested for each reaction in (Figure).

(a) 0.0686 mol Mg, 1.67 g Mg; (b) 2.701 × 10−3 mol O2, 0.08644 g O2; (c) 6.43 mol MgCO3, 542 g MgCO3 (d) 713 mol H2O, 12.8 kg H2O; (e) 16.31 mol BaO2, 2762 g BaO2; (f) 0.207 mol C2H4, 5.81 g C2H4

 

5. H2 is produced by the reaction of 118.5 mL of a 0.8775-M solution of H3PO4 according to the following equation: 2\text{Cr}+2{\text{H}}_{3}{\text{PO}}_{4}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}3{\text{H}}_{2}+2{\text{CrPO}}_{4}.

(a) Outline the steps necessary to determine the number of moles and mass of H2.

(b) Perform the calculations outlined.

 

6. Gallium chloride is formed by the reaction of 2.6 L of a 1.44 M solution of HCl according to the following equation: 2\text{Ga}+6\text{HCl}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{GaCl}}_{3}+3{\text{H}}_{2}.

(a) Outline the steps necessary to determine the number of moles and mass of gallium chloride.

(b) Perform the calculations outlined.

(a) \text{volume HCl solution}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{mol HCl}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}{\text{mol GaCl}}_{3}; (b) 1.25 mol GaCl3, 2.2 × 102 g GaCl3

 

7. I2 is produced by the reaction of 0.4235 mol of CuCl2 according to the following equation: 2{\text{CuCl}}_{2}+4\text{KI}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2\text{CuI}+4\text{KCl}+{\text{I}}_{2}.

(a) How many molecules of I2 are produced?

(b) What mass of I2 is produced?

 

8. Silver is often extracted from ores such as K[Ag(CN)2] and then recovered by the reaction
 2\text{K}\left[\text{Ag}{\left(\text{CN}\right)}_{2}\right]\left(aq\right)+\text{Zn}\left(s\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{2Ag}\left(s\right)+\text{Zn}{\left(\text{CN}\right)}_{2}\left(aq\right)+2\text{KCN}\left(aq\right)

(a) How many molecules of Zn(CN)2 are produced by the reaction of 35.27 g of K[Ag(CN)2]?

(b) What mass of Zn(CN)2 is produced?

(a) 5.337 × 1022 molecules; (b) 10.41 g Zn(CN)2

 

9. What mass of silver oxide, Ag2O, is required to produce 25.0 g of silver sulfadiazine, AgC10H9N4SO2, from the reaction of silver oxide and sulfadiazine?
 2{\text{C}}_{10}{\text{H}}_{10}{\text{N}}_{4}{\text{SO}}_{2}+{\text{Ag}}_{2}\text{O}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{AgC}}_{10}{\text{H}}_{9}{\text{N}}_{4}{\text{SO}}_{2}+{\text{H}}_{2}\text{O}

 

10. Carborundum is silicon carbide, SiC, a very hard material used as an abrasive on sandpaper and in other applications. It is prepared by the reaction of pure sand, SiO2, with carbon at high temperature. Carbon monoxide, CO, is the other product of this reaction. Write the balanced equation for the reaction, and calculate how much SiO2 is required to produce 3.00 kg of SiC.

{\text{SiO}}_{2}+3\text{C}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{SiC}+2\text{CO,} 4.50 kg SiO2

 

11. Automotive air bags inflate when a sample of sodium azide, NaN3, is very rapidly decomposed.
 2{\text{NaN}}_{3}\left(s\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2\text{Na}\left(s\right)+3{\text{N}}_{2}\left(g\right)

 

12. What mass of sodium azide is required to produce 2.6 ft3 (73.6 L) of nitrogen gas with a density of 1.25 g/L?

 

13. Urea, CO(NH2)2, is manufactured on a large scale for use in producing urea-formaldehyde plastics and as a fertilizer. What is the maximum mass of urea that can be manufactured from the CO2 produced by combustion of 1.00\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{3}\phantom{\rule{0.2em}{0ex}}\text{kg} of carbon followed by the reaction?
 {\text{CO}}_{2}\left(g\right)+2{\text{NH}}_{3}\left(g\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{CO}\phantom{\rule{0.2em}{0ex}}{\left({\text{NH}}_{2}\right)}_{2}\left(s\right)+{\text{H}}_{2}\text{O}\left(l\right)

5.00 × 103 kg

 

14. In an accident, a solution containing 2.5 kg of nitric acid was spilled. Two kilograms of Na2CO3 was quickly spread on the area and CO2 was released by the reaction. Was sufficient Na2CO3 used to neutralize all of the acid?

 

15 A compact car gets 37.5 miles per gallon on the highway. If gasoline contains 84.2% carbon by mass and has a density of 0.8205 g/mL, determine the mass of carbon dioxide produced during a 500-mile trip (3.785 liters per gallon).

1.28 × 105 g CO2

 

16. What volume of 0.750 M hydrochloric acid solution can be prepared from the HCl produced by the reaction of 25.0 g of NaCl with excess sulfuric acid?
 \text{NaCl}\left(s\right)+{\text{H}}_{2}{\text{SO}}_{4}\left(l\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{HCl}\left(g\right)+{\text{NaHSO}}_{4}\left(s\right)

 

17. What volume of a 0.2089 M KI solution contains enough KI to react exactly with the Cu(NO3)2 in 43.88 mL of a 0.3842 M solution of Cu(NO3)2?
 2\text{Cu}{\left({\text{NO}}_{3}\right)}_{2}+4\text{KI}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2\text{CuI}+{\text{I}}_{2}+4{\text{KNO}}_{3}

161.40 mL KI solution

 

18. A mordant is a substance that combines with a dye to produce a stable fixed color in a dyed fabric. Calcium acetate is used as a mordant. It is prepared by the reaction of acetic acid with calcium hydroxide.
 2{\text{CH}}_{3}{\text{CO}}_{2}\text{H}+\text{Ca}{\text{(OH)}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}\text{Ca}{\left({\text{CH}}_{3}{\text{CO}}_{2}\right)}_{2}+2{\text{H}}_{2}\text{O}

 

19. What mass of Ca(OH)2 is required to react with the acetic acid in 25.0 mL of a solution having a density of 1.065 g/mL and containing 58.0% acetic acid by mass?

 

20. The toxic pigment called white lead, Pb3(OH)2(CO3)2, has been replaced in white paints by rutile, TiO2. How much rutile (g) can be prepared from 379 g of an ore that contains 88.3% ilmenite (FeTiO3) by mass?
 2{\text{FeTiO}}_{3}+4\text{HCl}+{\text{Cl}}_{2}\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}2{\text{FeCl}}_{3}+2{\text{TiO}}_{2}+2{\text{H}}_{2}\text{O}

176 g TiO2

Glossary

stoichiometric factor
ratio of coefficients in a balanced chemical equation, used in computations relating amounts of reactants and products
stoichiometry
relationships between the amounts of reactants and products of a chemical reaction

License

Icon for the Creative Commons Attribution 4.0 International License

Chemistry and the Environment Copyright © 2020 by OSCRiceUniversity/DevinRLatimer is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book